Linear Ball Bearing - Round Flange JPF08G 8mm JIS Metric RST

Linear Ball Bearing - Round Flange JPF08G 8mm JIS Metric RSTRound Flanged Linear Ball Bearing with an 8mm ID JIS Metric and standard width, featuring an end mounted flange, a heat treated alloy steel shell for durability and double seals for enhanced protection. Boasts a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise. Excels in cantilevered applications, unconstrained by the 2: 1 binding rule for plain bearings. JIS Metric (Japanese Industrial Standards) for various

coated with PTFE to prevent flaking

Double sizes: from 1/2" to 2” (Inch)

The assembly exceeds industry standards

Use a floating "F" part number for each opposing block on parallel shafts

Double Plain Linear Bearing of 60mm JIS Metric ID with a round flange (end-mounted) and a compensated running clearance of 0

ISO metric series - Open shell - 25mm bore

with a 10mm compensated ID that provides a 0

Optional liners: corrosive chemical resistant Frelon®J FDA Compliant Frelon®W

Closed shell plain linear bearing with a JIS 50mm ID

the inserted bearing can tilt slightly within the housing to compensate for up to 1/2° of misalignment in all directions

19mm OD and 16mm length with a closed lightweight aluminum alloy shell

Crowned self-aligning plain linear bearing with a 20mm JIS Metric inner diameter and a compensated running clearance of 0